![]() |
Re: Installing a new Pool
Originally Posted by MenAtWork
(Post 5052122)
I think it will certainly add value but maybe not the whole amount.
I'll try and find out when it's finished. It's certainly a LOT cheaper to buy a bit inland, get a decent sized block and pay for a pool installing than it is to live within a couple of minutes of the beach. (We are about 15 min inland) |
Re: Installing a new Pool
Originally Posted by quercus
(Post 5054449)
Good to know how little water you need to keep it topped. Is it high maintenance with chemicals etc?
|
Re: Installing a new Pool
I'm not sure about cost of chemicals etc.
According to theelectrician the pump will cost about 14 cents a day on a standard electrical circuit and about 8 cents a day to run on something called Tariff 33 ( you have to have a separate electrical meter and power is only available 7am-5pm or thereabouts) I think its a bit like economy7. It costs about $500 for the meter to be installed. Our pool is 12M x 3.5M and we have a 32" sand filter. |
Re: Installing a new Pool
Originally Posted by hitchcock71
(Post 5054704)
i was going to ask that how much is the annual up keep and monthly costs involved ???
My pool seems to consume a lot of acid so i buy that fairly often, but its cheap. A salt water pool requires very little in the way of chemical input so I'd certainly put my chemical costs at less than $150 a year then maybe another $50-$100 to replace bit and pieces of the creepy crawly, leaf rake etc. Actually I will say I had a cracked pipe last year which required digging up the concrete around the pool so that set me back $800. I've never had it done but I guess its also a good idea to have the pump, chlorinator and filter serviced on a regular basis too. |
Re: Installing a new Pool
Originally Posted by MenAtWork
(Post 5032112)
Hi guys,
I'm having a new pool installed in and thought that the process might interest anyone thinking of doing the same. I'm going to load up a couple of photos of the first couple of days and if theres any interest i'll keep it going. Steve |
Re: Installing a new Pool
1 Attachment(s)
The Shuttering is off and the the steps to the patio are being laid. The patio steps have to be poured separately from the pool so that a expantion join can be inserted between the two concrete masses.
The pipes are mostly in place now for the electrical and solar. (you may be able to make them out on the picture near the palms at the side of the deck) |
Re: Installing a new Pool
It's progressing fast!
The solar is for heating is it? Will it be from a panel on the roof? Do you use solar for the house? Q |
Re: Installing a new Pool
Originally Posted by MenAtWork
(Post 5066193)
The Shuttering is off and the the steps to the patio are being laid. The patio steps have to be poured separately from the pool so that a expantion join can be inserted between the two concrete masses.
The pipes are mostly in place now for the electrical and solar. (you may be able to make them out on the picture near the palms at the side of the deck) |
Re: Installing a new Pool
Originally Posted by quercus
(Post 5066307)
It's progressing fast!
The solar is for heating is it? Will it be from a panel on the roof? Do you use solar for the house? Q We are just using solar water heating for the pool it's basically a series of black tubes that sit on the roof with a temperature sensor in the pool. If it's not warm enough water is directed through the tubes during the day to pick up heat from the sun. If the pool is too warm water is directed through the solar panel during the night to radiate heat away. We are not using these guys but their website has a pretty good explanation of how it all works http://www.zane.com.au/html/home.htm |
Re: Installing a new Pool
Smart, innit!
|
Re: Installing a new Pool
3 Attachment(s)
Not a lot has happened lately, partly down to the lovely sunshine coast weather we have had lately and partly just waiting for the concrete to cure. It was about 700mm deep on monday from the rain.
The next steps include some tiling to do around the pool, rendering to the retaining wall, getting the fencing up, pebbling and filling with water. The solar heating is in place which you might see in the photos. MenAtWork |
Re: Installing a new Pool
Originally Posted by MenAtWork
(Post 5242641)
Not a lot has happened lately, partly down to the lovely sunshine coast weather we have had lately and partly just waiting for the concrete to cure. It was about 700mm deep on monday from the rain.
The next steps include some tiling to do around the pool, rendering to the retaining wall, getting the fencing up, pebbling and filling with water. The solar heating is in place which you might see in the photos. MenAtWork |
Re: Installing a new Pool
Originally Posted by MenAtWork
(Post 5242641)
Not a lot has happened lately, partly down to the lovely sunshine coast weather we have had lately and partly just waiting for the concrete to cure. It was about 700mm deep on monday from the rain.
The next steps include some tiling to do around the pool, rendering to the retaining wall, getting the fencing up, pebbling and filling with water. The solar heating is in place which you might see in the photos. MenAtWork |
Re: Installing a new Pool
Hi OH,
The Pool is out of the ground by 8-18" on one side. You cant do that with fibreglass. We could have raised / lowered the ground to accomodate a fibre glass pool but we wanted to tie the design into the house so that the pool was at the level of the bedroom and the steps lined up with the patio. The Pool is 12M and there aren't many fibreglass choices to accomodate that size. If we could have had what we wanted in fibreglass we would have done as its cheaper and comes with some pretty good guarantees. |
Re: Installing a new Pool
Originally Posted by MenAtWork
(Post 5242819)
Hi OH,
The Pool is out of the ground by 8-18" on one side. You cant do that with fibreglass. We could have raised / lowered the ground to accomodate a fibre glass pool but we wanted to tie the design into the house so that the pool was at the level of the bedroom and the steps lined up with the patio. The Pool is 12M and there aren't many fibreglass choices to accomodate that size. If we could have had what we wanted in fibreglass we would have done as its cheaper and comes with some pretty good guarantees. When do you expect to dip your toes in the water?:thumbup: What type of pool fencing have you decided on? Have you looked at the glass ones? |
| All times are GMT -12. The time now is 6:29 am. |
Powered by vBulletin: ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.