![]() |
Using US electricals in the UK - anyone done it?
I know this is really a UK Yankee question, but I'm not registered there and it's simpler to ask here, so humour me please! I'll ask there if I have to :)
I have a couple of young newly wed (last month) friends who are moving with the Air Force to Cambridge area, they'll be there for 3 years I think. I told her that I didn't think it was worth bringing her electronics, but she said "I know someone who successfully used step-down transformers to run their US appliances (blenders, microwaves, tvs etc) in the UK" I had heard that there was a risk that even with the transformer thing you could fry the electrical and blow the fuses in your home, but the truth is I really don't know. Anyone here with experience of doing that? |
Re: Using US electricals in the UK - anyone done it?
Just tell her it'll burn the house down. Should put her mind at rest.
|
Re: Using US electricals in the UK - anyone done it?
Originally Posted by fatbrit
(Post 9612846)
Just tell her it'll burn the house down. Should put her mind at rest.
|
Re: Using US electricals in the UK - anyone done it?
Originally Posted by The Horticulturalist
(Post 9612850)
Charming! :)
|
Re: Using US electricals in the UK - anyone done it?
Originally Posted by Jerseygirl
(Post 9612857)
He's right though. Bought in the US travel hair dryer, hair straighteners, printer...all dual voltage...all blew when used in the UK.. The hair straighteners melted. :eek:
|
Re: Using US electricals in the UK - anyone done it?
Jersey, were you using any of these items with a transformer, or just the kind of plug you buy in an airport?
|
Re: Using US electricals in the UK - anyone done it?
ddddddddd
Originally Posted by The Horticulturalist
(Post 9612866)
Jersey, were you using any of these items with a transformer, or just the kind of plug you buy in an airport?
I think you'll probably have problems with anything with a heater ie hairdryer...even if it's dual voltage. |
Re: Using US electricals in the UK - anyone done it?
Originally Posted by The Horticulturalist
(Post 9612866)
Jersey, were you using any of these items with a transformer, or just the kind of plug you buy in an airport?
But to be honest, if they are going to be there 3 years, its probably more sensible to buy new appliances in the UK, then switch back to the old ones when they return to the US. There are huge carboot sales around Cambridge that are almost entirely full of stuff from the USAF bases in the area! I used to live there and my son grew up with all-American toys from these sales. Folks stay three years, take their stuff to a sale, and then head back across the pond. |
Re: Using US electricals in the UK - anyone done it?
Originally Posted by Middlemore
(Post 9612904)
A transformer works fine,
|
Re: Using US electricals in the UK - anyone done it?
Originally Posted by The Horticulturalist
(Post 9612830)
I (blenders, microwaves, tvs etc)
Computers will be fine. It is a fire risk though and insurance might not cover damage caused by a transformer, and those things get hot too, especially if used constantly. |
Re: Using US electricals in the UK - anyone done it?
In theory you can use a step-up/down transformer - they're easily available here in the US and increase in cost with increasing power rating - a 500W unit will be around $50-$60 plus shipping - quite heavy...
In practice though... DO NOT USE with hair driers and anything else that is designed to heat things up using direct heat - in the US these are designed to draw current at a lower voltage than similar devices in the UK... the higher voltage in the UK simply means they draw even more current in the UK... IF you are lucky, the fuse will blow - no big deal. If you are unlucky, you could burn the house down (worst extreme) - in electrical fires in the home, the single biggest cause is high currents through junction or socket boxes, leading to heat, and the rest is history. Such a step up/down transformer is fine for low power hand held things - like pedicure thingies that her in doors uses. Most modern electronic gadgetery, eg iPad, Laptop, mobile phone etc are designed for all voltages around the world... The safest thing to do is buy new in the UK. And I know this cost you 30% more than you'd pay in the US, but... Good luck Cheers HTS |
Re: Using US electricals in the UK - anyone done it?
I have no idea, all I know is that I had a very dodgy moment a couple of years ago, after buying an i-pod docking station/phone/radio, come everything else, in Florida, hoping because it had a dual voltage thingy that it would work in the UK.
How wrong could I be.......... plugged it in, turned it on and BANG!!!! Gone, cremated in 1 second flat, of course, that was just as my husband was saying "I think you better check online if you need a transformer for that..............." - TOO LATE!!! RIP little i-pod docking station, it was good while it lasted :( |
Re: Using US electricals in the UK - anyone done it?
Originally Posted by Brat1
(Post 9614335)
...BANG!!!! Gone, cremated in 1 second flat....RIP little i-pod docking station, it was good while it lasted :( |
Re: Using US electricals in the UK - anyone done it?
Originally Posted by The Horticulturalist
(Post 9612830)
I know this is really a UK Yankee question, but I'm not registered there and it's simpler to ask here, so humour me please! I'll ask there if I have to :)
I have a couple of young newly wed (last month) friends who are moving with the Air Force to Cambridge area, they'll be there for 3 years I think. I told her that I didn't think it was worth bringing her electronics, but she said "I know someone who successfully used step-down transformers to run their US appliances (blenders, microwaves, tvs etc) in the UK" I had heard that there was a risk that even with the transformer thing you could fry the electrical and blow the fuses in your home, but the truth is I really don't know. Anyone here with experience of doing that? http://www.youtube.com/watch?v=xbpPI...ailpage#t=205s |
Re: Using US electricals in the UK - anyone done it?
Originally Posted by HarryTheSpider
(Post 9614253)
in the US these are designed to draw current at a lower voltage than similar devices in the UK... the higher voltage in the UK simply means they draw even more current in the UK
The only way the device can draw more current is if it is allowed to i.e. by increasing the voltage supplied to it. So if you have a correctly specified and properly constructed transformer, with the correct secondary voltage for the device you intend to power, you will have no problems powering it by this method. (By properly constructed, I mean isolated primary and secondary windings. I would never encourage use of an autotransformer for this type of application). I think what probably has happened in the past is that people skimp when buying such a transformer and and don't purchase one with the correct power rating or secondary voltage and then have problems with appliances failing. This has then perpetuated a myth that "transformers are bad and will fry your hairdryer." |
| All times are GMT -12. The time now is 10:50 pm. |
Powered by vBulletin: ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.