![]() |
Heat pump
Hi
we have a house in the Ourique area and the old junkers gas boiler has finally given up, we have purchased a shiny new air source heat pump combined with water cylinder, unfortunately we can’t find anyone to fit the heat pump. The heat pump is fitted with a plug and I could probably alter the plumbing to fit but not sure about the regulations if I attempted this ? So wondered if anyone out there could recommend a company that would do this type of work. Thanks in advance for any advice |
Re: Heat pump
Have you been to see Nelson? Or asked Heldar?
|
Re: Heat pump
Hi Ouriquejan
Is Nelson the hardware store ? I have been there and asked Marco, he gave our number to someone but they didn’t ring and I think they didn’t speak English. We don’t know Anyone called Heldar sorry. We’re not living there at the moment so hoping to arrange for someone to look at it as soon as we’re allowed back over. regards |
Re: Heat pump
Heldar is one of the local builders, if he doesn't know some-one, no-one will. When you get over, send me a pm and I'll give you his phone number.
You could also ask Marco to ring the person he mentioned for you. Nelson is behind the drogaria, he might also know some.one, if he can't do it himself. |
Re: Heat pump
Hi Ouriquejan
thank you I’ll get in touch as soon as I get flights sorted Many thanks |
Re: Heat pump
can I ask where you purchased the heat pump from ?
|
Re: Heat pump
can I ask where you purchased your heat pump from ?
|
Re: Heat pump
Hi we purchased it from Leroy Merlin I tried to include a picture but I have to have 5 posts apparently before I can do that! it’s a Giatsu 200 ltr
|
Re: Heat pump
|
Re: Heat pump
many thanks AMT63, I will take a look online - are you plumbing it to underfloor heating?
Had a look at online products and cant find the exact one but this one looks like a rebadged version at 1499 euro (minus 10% if spend over 1500) https://cimg7.ibsrv.net/gimg/british...033fedfefa.jpg HTW 200 https://www.leroymerlin.pt/Produtos/...carateristicas |
Re: Heat pump
A friend went through the same transition beginning of last year, his gas boiler failed right when the weather was at its coldest. He got a heat pump instead of replacing the gas boiler and fitted himself. As a self contained item requiring no additional bits being connected he didn't see any reason to get any one in.
He found it takes a long time for the house to get warm (his radiators are no where near as hot as they used to be, warm to touch rather than hot). He made one addition which works a treat. He'd a log burner in his lounge which most nights through winter he'd have running anyway. His log burner had always had a back boiler but had never been connected to anything. He connected it to the heating system and added a pipe stat and extra circulation pump which kicks in once the log burner gets hot. His log burner now heats the whole house in conjunction with the heat pump which clicks off when the room stat reaches temperature. The pump on the log burner keeps going until he's gone to bed and the fire goes out, and as the temperature drops down again overnight the heat pump kicks back in again. |
Re: Heat pump
Heat pump needs either underfloor or huge radiators to run economically and be left set at 21 degrees ish, otherwise you can be fighting a losing battle with keeping warm and spending far too much on electricity to do so. If you have an old draughty poorly insulated property forget heat pumps for heating.
|
Re: Heat pump
Originally Posted by dingg
(Post 12989656)
Heat pump needs either underfloor or huge radiators to run economically and be left set at 21 degrees ish, otherwise you can be fighting a losing battle with keeping warm and spending far too much on electricity to do so. If you have an old draughty poorly insulated property forget heat pumps for heating.
|
Re: Heat pump
Radiators need water at approx. 65'C due to their relatively small surface area- heat pumps are only good for under floor heating at 35'C but due to the massive surface area of the floor,give a nice even heat - you can use radiators but as stated, they would need to be massive to give a large enough surface area to compensate for the lower water temp.
|
Re: Heat pump
Originally Posted by RUFUS HOUND
(Post 12990360)
Radiators need water at approx. 65'C due to their relatively small surface area- heat pumps are only good for under floor heating at 35'C but due to the massive surface area of the floor,give a nice even heat - you can use radiators but as stated, they would need to be massive to give a large enough surface area to compensate for the lower water temp.
|
| All times are GMT -12. The time now is 8:57 pm. |
Powered by vBulletin: ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.