![]() |
Re: practical exam theory
At the downunder centre if you fail a part you have to resit the whole exam I believe and the assessor on the day gives you plenty of push to help you get the right answers, but won't give you them directly. Also he gives you the heads up on the day about pass or fail. Revise your college theory aswell as general electrical knowledge about how electricity works etc, and reasons for types of motor systems and your DOL diagram. This needs a remote start stop, local stop, thermal overload connected to the same coil for the contactors etc
|
Re: practical exam theory
Originally Posted by woody2709
(Post 12232368)
At the downunder centre if you fail a part you have to resit the whole exam I believe and the assessor on the day gives you plenty of push to help you get the right answers, but won't give you them directly. Also he gives you the heads up on the day about pass or fail. Revise your college theory aswell as general electrical knowledge about how electricity works etc, and reasons for types of motor systems and your DOL diagram. This needs a remote start stop, local stop, thermal overload connected to the same coil for the contactors etc
Thanks again |
Re: practical exam theory
Originally Posted by ryan1992
(Post 12232345)
Perfect thanks for the reply. I'll get in touch with the down under centre and ask them a few more questions aswell. They also sell a book it's £50 and they recommend it if you need to brush up on anything before the assessment. Has anyone purchased this?
|
Re: practical exam theory
Originally Posted by old.sparkles
(Post 12233278)
No, but I do industrial maintenance so the theory and motors, etc was all good. My biggest worry was the domestic testing as I didn't really do enough to know the order of the tests, best ways of getting it done quickly, etc. At the end of the day, it was worrying about nothing as was straight forward.
No worries. Iv ordered the book from the down under centre won't hurt I suppose. Test in two weeks fingers crossed. Thanks for the replies |
Re: practical exam theory
Can anyone confirm if this is the circuit diagram that you have to draw at the skill assessment. Thanks https://s-media-cache-ak0.pinimg.com...40457aa2d8.jpg
|
Re: practical exam theory
Originally Posted by ryan1992
(Post 12238246)
Can anyone confirm if this is the circuit diagram that you have to draw at the skill assessment. Thanks https://s-media-cache-ak0.pinimg.com...40457aa2d8.jpg
|
Re: practical exam theory
Hi Guys,
Thanks for all the passed posts they helped me get the right study information and pass ðŸ‘ðŸ», Definitely recommend studying, all the pass posts are true and still up to date on what's required on the day. Thanks down under centre London |
Re: practical exam theory
Originally Posted by hasselhoff86
(Post 11239322)
Yeah I have done it in Perth 2 weeks ago, send me your email and il send you on schematic and practice questions etc.. :thumb:
|
Re: practical exam theory
dear friends,
My name is shanth from India, i had gone through max posts. there were discussions regarding practical exams in various countries can any one tell me pattern of exam will be same in all countries. because some countries uses 100,110 120v and in India we have 220,230,240v. (Here we are referring to single phase AC supply for household. Where 110 V is used, 3 phase supply is usually mentioned as 220 V. Further in these countries supply frequency is 60 Hz. Synchronous speed of 2 pole motor is 3600 RPM. Countries using 220 V / 230 V specify nominal 3 phase supply as 415 / 440 V. Supply frequency is 50 Hz. Synchronous speed of 2 Pole motor is 3000 RPM. So motor speeds are lower comparatively. So we can see that for 110 V systems, motor speeds are more. Insulation levels are lower. So if conductor cross sections are more, insulation required is less. Further higher machine speeds also have their advantages.) is there any one who took exam from Mumbai. can any one share their exam experience in India. i had googled a lot but i didn't find any help. please help me in my preparation for exam. |
Re: practical exam theory
Originally Posted by shanth
(Post 12378266)
dear friends,
My name is shanth from India, i had gone through max posts. there were discussions regarding practical exams in various countries can any one tell me pattern of exam will be same in all countries. because some countries uses 100,110 120v and in India we have 220,230,240v. (Here we are referring to single phase AC supply for household. Where 110 V is used, 3 phase supply is usually mentioned as 220 V. Further in these countries supply frequency is 60 Hz. Synchronous speed of 2 pole motor is 3600 RPM. Countries using 220 V / 230 V specify nominal 3 phase supply as 415 / 440 V. Supply frequency is 50 Hz. Synchronous speed of 2 Pole motor is 3000 RPM. So motor speeds are lower comparatively. So we can see that for 110 V systems, motor speeds are more. Insulation levels are lower. So if conductor cross sections are more, insulation required is less. Further higher machine speeds also have their advantages.) is there any one who took exam from Mumbai. can any one share their exam experience in India. i had googled a lot but i didn't find any help. please help me in my preparation for exam. |
Re: practical exam theory
Originally Posted by old.sparkles
(Post 12378901)
Different countries have different requirements so perhaps you could say which countries you are looking at and why? If it is for migration, google should be able to help, as will the country specific immigration website.
is there any helpful material, exam pattern or tips from the person who had attended examination in Mumbai, India. please help in this. i had googled a lot but only in britishexpats site got these may post and discussions. |
Re: practical exam theory
Originally Posted by shanth
(Post 12378912)
my dear old sparkels, i think u haven't read my post. i had mentioned clearly that i am from India and i am preparing for general electrician practical exam vetassess.
Good luck. |
Re: practical exam theory
Originally Posted by shanth
(Post 12378912)
my dear old sparkels, i think u haven't read my post. i had mentioned clearly that i am from India and i am preparing for general electrician practical exam vetassess.
is there any helpful material, exam pattern or tips from the person who had attended examination in Mumbai, India. please help in this. i had googled a lot but only in britishexpats site got these may post and discussions. And I am not your dear! EDIT - sorry disregard my post - I have just seen you only want help from someone who has undertaken testing in Mumbai - good luck with that. |
Re: practical exam theory
Originally Posted by old.sparkles
(Post 12379090)
I think you didn't - not in the post I quoted. However, the format of the skills assessment is the same regardless of where in the world you are - if you are in an OSAP country and occupation, There is plenty of discussion on the forum for the format of the skills assessment - it will be the same if you are in the UK, or India, or any of these countries - China, Fiji, Hong Kong SAR, Ireland, Macau SAR, Philippines, South Africa, Vietnam. And there are assessing your suitability for Australia - you need to follow Australian standards.
And I am not your dear! EDIT - sorry disregard my post - I have just seen you only want help from someone who has undertaken testing in Mumbai - good luck with that. (i taught that this thread was created to discuss regarding practical exam theory for Australia) Sorry, my English is not so good. dear. (used in the salutation of a letter as an expression of affection or respect or as a conventional greeting): Dear Sir. Please accept my sincere apologies for the mistake. till date there were lot of discussions on this thread regarding practical exam. you are a gladiator to this arena and you know everything about this process. |
Re: practical exam theory
Originally Posted by shanth
(Post 12381303)
Madam old.sparkles,
(i taught that this thread was created to discuss regarding practical exam theory for Australia) Sorry, my English is not so good. dear. (used in the salutation of a letter as an expression of affection or respect or as a conventional greeting): Dear Sir. Please accept my sincere apologies for the mistake. till date there were lot of discussions on this thread regarding practical exam. you are a gladiator to this arena and you know everything about this process. To be eligible for the skills process, you will need an IELTS (or similar) score of at least all 6.0's so if English is not your strong point, you might want to consider prioritising this. All electricians who make it through the visa process need to undertake a period of supervised employment. If your English is not good enough, it will make life a lot harder. And please, stop with the Madam, dear, etc - you can just reply and quote the post. If you have a read of the forum, you can see how people address each other, and if you must refer to me direct it is old.sparkles, sparkles or OS usually. |
| All times are GMT -12. The time now is 3:07 am. |
Powered by vBulletin: ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.