Aussie wiring rules
Has anyone got a copy of the 2007 wiring rules and related books for regs course that they would like to sell.
Can collect in northern perth. Regards |
Re: Aussie wiring rules
I can let you have the books you need for peer in pdf format.
You will have to print them out or read them on your computer. AS/NZS3000-2007 AS/NZS3008.1.1.2009 AS/NZS 3012.2003 ETSA SERVICE RULES It will save you buying them They cost about $340 Let me Know if you require them. Lee |
Re: Aussie wiring rules
Hi Lee
Thanks for your reply,i am definately interested ,can you pm me your e mail addy so we can sort out payment and transfer. Cheers mate |
Re: Aussie wiring rules
Hi, I don't want any money for them.
I will send you a link to download them from my online doc storage. Are you doing the wiring rules at peer? Regards,Lee |
Re: Aussie wiring rules
I am in two minds at the minute mate as I'm in the uk.I thinking of doing the correspondents course and flying in for revision and the exam as to a 2 week course in Perth.I want to have a licence and to work straight away when we arrive in Australia. Regards
|
Re: Aussie wiring rules
Did the link work OK
|
Re: Aussie wiring rules
Hi Lee
Yes its sorted mate,thank you very much :thumbsup.Your kindness knows know bounds sir. Regards |
Re: Aussie wiring rules
Originally Posted by pompeypom
(Post 8265086)
I am in two minds at the minute mate as I'm in the uk.I thinking of doing the correspondents course and flying in for revision and the exam as to a 2 week course in Perth.I want to have a licence and to work straight away when we arrive in Australia. Regards
|
Re: Aussie wiring rules
Hi mate
I am after the Electrical Mechanics cert and to do the wiring regs course at Balcatta when i have my ARTC. Which route did you take? Regards |
Re: Aussie wiring rules
hi pompeydon,
I have just done the course at Balcatta. Passed no problem,just sent off for licence. Recommend this route as it,s a great course and if your a half decent spark you,ll have no problem Greg |
Re: Aussie wiring rules
Hi Greg
Congratulations on your success,it must be a weight off of your shoulders.Were you already working as a spark? Do you have any past exam papers that you could share,if not what can you remember about the exam questions and course content. Any info would be appreciated Regards PS did you have the course books by jeffrey hampson that you want to sell,i can possibly get them collected |
Re: Aussie wiring rules
Pompeypom,haven't worked since I got here 9 months ago.
But there again I'm from Brisbane and flew over for the course should be ok for work now. The course is over the 2 weeks and on both Fridays you have an exam in which you need 70%.it's nearly all multiple-choice and the questions are so easy you'll finish within 15 minutes. The main area of the course is what you do each dAy and you are assessed while in the workshop.Again it's nothing to worry about everthing is explained really well and the 2 tutors are really helpful and are not there to catch you out on anything. The first week was about motors and starters.Not my type as I'm an installation electrician but after going over it all in the classroom was able to wire star/delta etc down in the workshop.also have own workarea to wire sokets 2 way lights and cooker point. 2nd week was easier mainly health and safety dead easy was able to finish early afternoon most days. Greg |
Re: Aussie wiring rules
Hi Lee and Joanne
I am also trying to find the regs and related books for the peer course. I understand you have the books on computer format. Would you be willing to sell them to me. Regards Jason |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8264651)
Hi, I don't want any money for them.
I will send you a link to download them from my online doc storage. Are you doing the wiring rules at peer? Regards,Lee Thanks in advance. |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8261457)
I can let you have the books you need for peer in pdf format.
You will have to print them out or read them on your computer. AS/NZS3000-2007 AS/NZS3008.1.1.2009 AS/NZS 3012.2003 ETSA SERVICE RULES It will save you buying them They cost about $340 Let me Know if you require them. Lee I need these books, could you please give me the link of them? thanks. |
Re: Aussie wiring rules
Originally Posted by greg123
(Post 8291541)
Pompeypom,haven't worked since I got here 9 months ago.
But there again I'm from Brisbane and flew over for the course should be ok for work now. The course is over the 2 weeks and on both Fridays you have an exam in which you need 70%.it's nearly all multiple-choice and the questions are so easy you'll finish within 15 minutes. The main area of the course is what you do each dAy and you are assessed while in the workshop.Again it's nothing to worry about everthing is explained really well and the 2 tutors are really helpful and are not there to catch you out on anything. The first week was about motors and starters.Not my type as I'm an installation electrician but after going over it all in the classroom was able to wire star/delta etc down in the workshop.also have own workarea to wire sokets 2 way lights and cooker point. 2nd week was easier mainly health and safety dead easy was able to finish early afternoon most days. Greg Cheers Paul |
Re: Aussie wiring rules
Paul,
you can use artc or vetasses. I used vetassess just get in touch with energy safety and they will give you the details.I recommend this course as it's a fast way to the licence Greg |
Re: Aussie wiring rules
Originally Posted by greg123
(Post 8369371)
Paul,
you can use artc or vetasses. I used vetassess just get in touch with energy safety and they will give you the details.I recommend this course as it's a fast way to the licence Greg Paul |
Re: Aussie wiring rules
Originally Posted by greg123
(Post 8369371)
Paul,
you can use artc or vetasses. I used vetassess just get in touch with energy safety and they will give you the details.I recommend this course as it's a fast way to the licence Greg congrate for your sucess I want to know about Wa license root is fine for vet spark??.Because on Wa site or Mutual reconigation site it say the license issue will be Electrical fitter and for 3 year.In 3 year you need to gain on 12 months supervised job experience of installation work to get full WA electrician license. Thanks in advanced.I am in Melbourne now so decided to get wa license but affraid for 12 months experience. |
Re: Aussie wiring rules
Hi Raj,
Are you classed as fitter or mechanic.If you have vetasses and are classed as mechanic you can do the course in WA and then be issued with licence which is valid for 5 years Greg |
Re: Aussie wiring rules
Originally Posted by greg123
(Post 8370182)
Hi Raj,
Are you classed as fitter or mechanic.If you have vetasses and are classed as mechanic you can do the course in WA and then be issued with licence which is valid for 5 years Greg thanks for quick reply Iam vetassess spark and vetassess given me OTSR for general electrician.As per my Knowledge it not specify Mechanic or fitter by Vetassess.What is your license say which work you perform supervised or unsupervised or only fitter work or full installtion unsupervised. Pls give me advice . thanks in advance |
Re: Aussie wiring rules
I was classed as general electrician by vetassess as my work is installation work.As you are classed as general electrician is your work installation.as general electrician you would be able to do the course if authorized by energy safety and if successful be issued with licence which states electrician which allows you to do any work.no need for anything else
Greg |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8261457)
I can let you have the books you need for peer in pdf format.
You will have to print them out or read them on your computer. AS/NZS3000-2007 AS/NZS3008.1.1.2009 AS/NZS 3012.2003 ETSA SERVICE RULES It will save you buying them They cost about $340 Let me Know if you require them. Lee Any chance you could email me the link to <<address removed>> as im moving over in two weeks and really need to get my head down. Cheers Stewart |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8261457)
I can let you have the books you need for peer in pdf format.
You will have to print them out or read them on your computer. AS/NZS3000-2007 AS/NZS3008.1.1.2009 AS/NZS 3012.2003 ETSA SERVICE RULES It will save you buying them They cost about $340 Let me Know if you require them. Lee My hubby has just sent off for his ARTC then is gonna enrol on the PEER course. We are due to come over at the end of May when he's hopefully gonna sit his exam. Would it be possible to have a copy of the above. We would be willing to pay as i know you've had a few people wanting them. Many thanks Helen |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8261457)
I can let you have the books you need for peer in pdf format.
You will have to print them out or read them on your computer. AS/NZS3000-2007 AS/NZS3008.1.1.2009 AS/NZS 3012.2003 ETSA SERVICE RULES It will save you buying them They cost about $340 Let me Know if you require them. Lee or you can email me << address removed>> Jeff |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8261457)
I can let you have the books you need for peer in pdf format.
You will have to print them out or read them on your computer. AS/NZS3000-2007 AS/NZS3008.1.1.2009 AS/NZS 3012.2003 ETSA SERVICE RULES It will save you buying them They cost about $340 Let me Know if you require them. Lee regards glen |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8261457)
I can let you have the books you need for peer in pdf format.
You will have to print them out or read them on your computer. AS/NZS3000-2007 AS/NZS3008.1.1.2009 AS/NZS 3012.2003 ETSA SERVICE RULES It will save you buying them They cost about $340 Let me Know if you require them. Lee |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8261457)
I can let you have the books you need for peer in pdf format.
You will have to print them out or read them on your computer. AS/NZS3000-2007 AS/NZS3008.1.1.2009 AS/NZS 3012.2003 ETSA SERVICE RULES It will save you buying them They cost about $340 Let me Know if you require them. Lee glen |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8261457)
I can let you have the books you need for peer in pdf format.
You will have to print them out or read them on your computer. AS/NZS3000-2007 AS/NZS3008.1.1.2009 AS/NZS 3012.2003 ETSA SERVICE RULES It will save you buying them They cost about $340 Let me Know if you require them. Lee Regards Helen |
Re: Aussie wiring rules
The books have been removed since i lasted looked:frown:
This is the only site i can find that you can download them from http://store.payloadz.com/go?id=806775 But you have to pay:thumbdown: |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8550789)
The books have been removed since i lasted looked:frown:
This is the only site i can find that you can download them from http://store.payloadz.com/go?id=806775 But you have to pay:thumbdown: Helen:thumbup: |
Re: Aussie wiring rules
|
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8261457)
I can let you have the books you need for peer in pdf format.
You will have to print them out or read them on your computer. AS/NZS3000-2007 AS/NZS3008.1.1.2009 AS/NZS 3012.2003 ETSA SERVICE RULES It will save you buying them They cost about $340 Let me Know if you require them. Lee |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8557979)
All the books required for Peer course
http://store.payloadz.com/details/80...3000-2007.html http://store.payloadz.com/details/80...tion-3008.html http://store.payloadz.com/details/80...tion-3012.html http://store.payloadz.com/details/80...ice-rules.html |
Re: Aussie wiring rules
Originally Posted by Lee and Joanne
(Post 8557979)
All the books required for Peer course
http://store.payloadz.com/details/80...3000-2007.html http://store.payloadz.com/details/80...tion-3008.html http://store.payloadz.com/details/80...tion-3012.html http://store.payloadz.com/details/80...ice-rules.html |
Re: Aussie wiring rules
|
Re: Aussie wiring rules
Hi, has anyone downloaded the 3008 book? If so, is it the latest January 2010 version, as there is no info on the site at all?
Regards, Gez |
Re: Aussie wiring rules
Originally Posted by ShoreyM
(Post 8285991)
Hi. Have you been classed as a Fitter or Mechanic yet? If a Mech, then that's fine but I suggest you read the threads on here if you're a fitter and going down the PEER route, it's not that simple anymore.
Please explain . appreciated. |
Re: Aussie wiring rules
Originally Posted by gez500
(Post 8638319)
Hi, has anyone downloaded the 3008 book? If so, is it the latest January 2010 version, as there is no info on the site at all?
Regards, Gez |
Re: Aussie wiring rules
Nice one, thanks for letting me know. :thumbup:
Gez |
All times are GMT. The time now is 3:14 am. |
Powered by vBulletin: ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.