![]() |
Electrical advice - plug wiring
Hey. Arrived in Australia on Thursday - big move! We brought some electrical bits and bobs, as you do, which of course all have UK plugs. We have a few UK-Oz plug convertors, but I went to Dick Smith shop today and was surprised to see that they're not especially cheap - $16/$17 or so. An Aussie power plug is only $3 however.
I'm confident with UK plug wiring, and Aussie plug wiring looks easy too. What I'm not sure about is that fact that UK plugs have a fuse and Aussie plugs do not. Why is that then? If I cut the plug off my laptop's charger lead and wire on an Aussie plug, what's the risk to my equipment, if any? On a related note - any recommendations for buying stuff like this online? Dick Smith doesn't seem cheap - or perhaps the exchange rate just makes things seem expensive? - but usually online is cheaper. I need to buy a couple of multi-voltage power supplies too (e.g. for baby monitor) and don't fancy paying Dick Smith prices for those either. Cheers :) |
Re: Electrical advice - plug wiring
Originally Posted by Lucas_Dad
(Post 10270065)
Hey. Arrived in Australia on Thursday - big move! We brought some electrical bits and bobs, as you do, which of course all have UK plugs. We have a few UK-Oz plug convertors, but I went to Dick Smith shop today and was surprised to see that they're not especially cheap - $16/$17 or so. An Aussie power plug is only $3 however.
I'm confident with UK plug wiring, and Aussie plug wiring looks easy too. What I'm not sure about is that fact that UK plugs have a fuse and Aussie plugs do not. Why is that then? If I cut the plug off my laptop's charger lead and wire on an Aussie plug, what's the risk to my equipment, if any? On a related note - any recommendations for buying stuff like this online? Dick Smith doesn't seem cheap - or perhaps the exchange rate just makes things seem expensive? - but usually online is cheaper. I need to buy a couple of multi-voltage power supplies too (e.g. for baby monitor) and don't fancy paying Dick Smith prices for those either. Cheers :) |
Re: Electrical advice - plug wiring
Originally Posted by Pollyana
(Post 10270148)
This is why we advise people to bring power boards for UK stuff - cheaper and easier than plug changing (and in some States more legal) - my place looks like spaghetti junction, specially as there is only one power point in each bedroom and only one in the living room.
It is a great idea, but I'm already here! Can I get a UK power strips here? The idea of using a UK power strip did occur to me but only after arrival. However the question remains the same - if I do have a UK power strip, it will have a UK plug on the end of it, and I will need to change it for an Aussie plug. The UK plug has a fuse, the Aussie plug does not. I want to be sure that I'm not going to be frying anything! Cheers |
Re: Electrical advice - plug wiring
Originally Posted by Lucas_Dad
(Post 10270181)
Thanks for the reply!
It is a great idea, but I'm already here! Can I get a UK power strips here? The idea of using a UK power strip did occur to me but only after arrival. However the question remains the same - if I do have a UK power strip, it will have a UK plug on the end of it, and I will need to change it for an Aussie plug. The UK plug has a fuse, the Aussie plug does not. I want to be sure that I'm not going to be frying anything! Cheers |
Re: Electrical advice - plug wiring
Originally Posted by jimbo_d
(Post 10270238)
In WA at least it's illegal to wire a plug yourself, you'll find it hard to find spare plugs in a shop. They're available on the internet. also all houses by law should have an Rcd on the power so fuses are irrelevant.
|
Re: Electrical advice - plug wiring
Originally Posted by jimbo_d
(Post 10270238)
In WA at least it's illegal to wire a plug yourself, you'll find it hard to find spare plugs in a shop. They're available on the internet. also all houses by law should have an Rcd on the power so fuses are irrelevant.
|
Re: Electrical advice - plug wiring
Originally Posted by Lucas_Dad
(Post 10270243)
Seriously?! (Of course seriously) :huh: Thankfully I'm in NSW. So if you accidentally bust a plug, you have to pay for someone "qualified" and no doubt overpriced just to wire a simple plug? How is this policed/regulated?
|
Re: Electrical advice - plug wiring
Bunnings do sell plugs here in Wa.
|
Re: Electrical advice - plug wiring
The fuses in UK plugs are an additional safety factor which ensures that the failure of one appliance won't blow a main fuse/breaker and disable all the power points on that circuit - but it only works if you have the right size fuse in the plug which most don't. It's not essential.
Don't try buying plugs etc from Dick Smith, they're not in that business any more. Either go to Bunnings or Jaycar and rewire your appliances or buy one of these which will take any plug used in the world. |
Re: Electrical advice - plug wiring
Originally Posted by KJCherokee
(Post 10270744)
The fuses in UK plugs are an additional safety factor which ensures that the failure of one appliance won't blow a main fuse/breaker and disable all the power points on that circuit - but it only works if you have the right size fuse in the plug which most don't. It's not essential.
Don't try buying plugs etc from Dick Smith, they're not in that business any more. Either go to Bunnings or Jaycar and rewire your appliances or buy one of these which will take any plug used in the world. Good advice. Didn't know those coverters exisited. Looks handy. Yep, don't buy from DS, much cheaper at Bunnings. |
Re: Electrical advice - plug wiring
Originally Posted by Lucas_Dad
(Post 10270065)
Hey. Arrived in Australia on Thursday - big move! We brought some electrical bits and bobs, as you do, which of course all have UK plugs. We have a few UK-Oz plug convertors, but I went to Dick Smith shop today and was surprised to see that they're not especially cheap - $16/$17 or so. An Aussie power plug is only $3 however.
I'm confident with UK plug wiring, and Aussie plug wiring looks easy too. What I'm not sure about is that fact that UK plugs have a fuse and Aussie plugs do not. Why is that then? If I cut the plug off my laptop's charger lead and wire on an Aussie plug, what's the risk to my equipment, if any? On a related note - any recommendations for buying stuff like this online? Dick Smith doesn't seem cheap - or perhaps the exchange rate just makes things seem expensive? - but usually online is cheaper. I need to buy a couple of multi-voltage power supplies too (e.g. for baby monitor) and don't fancy paying Dick Smith prices for those either. Cheers :) I think the Australia plug has serious design flaws, but that's another topic. |
Re: Electrical advice - plug wiring
Originally Posted by KJCherokee
(Post 10270744)
Don't try buying plugs etc from Dick Smith, they're not in that business any more. Either go to Bunnings or Jaycar and rewire your appliances or buy one of these which will take any plug used in the world.
|
Re: Electrical advice - plug wiring
Thanks all. Have myself a plug, wire cutters and screwdriver. Going to give it a whirl...
I miss websites such as ebuyer, Misco, cclonline, etc. for getting cheap stuff. Even Amazon was pretty good most of the time. e.g. DS had a replacement power lead for my laptop's power block (so just the mains to block bit) and it was something like $15. Stuff that. Can't help think how I could get these in the UK for peanuts! Any suggestions for similar ebuyer, etc. websites? |
Re: Electrical advice - plug wiring
Originally Posted by Lucas_Dad
(Post 10271194)
Thanks all. Have myself a plug, wire cutters and screwdriver. Going to give it a whirl...
I miss websites such as ebuyer, Misco, cclonline, etc. for getting cheap stuff. Even Amazon was pretty good most of the time. e.g. DS had a replacement power lead for my laptop's power block (so just the mains to block bit) and it was something like $15. Stuff that. Can't help think how I could get these in the UK for peanuts! Any suggestions for similar ebuyer, etc. websites? |
Re: Electrical advice - plug wiring
Originally Posted by Amazulu
(Post 10271217)
Ebay
|
| All times are GMT -12. The time now is 9:06 am. |
Powered by vBulletin: ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.