Carpenters tools
 

My husband has many years collection of both 110 and hand tools. Can anyone advise if it is worth shipping the 110 tools :confused: They are expensive to buy, but have also heard they may be of no use in Australia :unsure:

Also, same for hand tools, is it worth shipping? and if he wants to take the basics in his suitcase i.e. hammer, square etc, will that be allowed? :huh:

Any advice or experiences would be appreciated! :thumbsup:

Re: Carpenters tools
 

If by "110 tools" you are referring to American electrical tools that require a 110VAC electrical system, they will not be much use in Australia - not only is our system 220-240V but the US 110V system runs at 60Hz instead of 50Hz. But I'm puzzled as to where in Essex you can use such tools?

No reason why he can't bring hand tools out in checked in baggage (not carry-on!) but considering the weight, is it worth it?

Re: Carpenters tools
 

All site tools in the UK are 110, so not sure what you are refering too about where in essex we reach them :confused: They are in every tool shop :huh:

Re: Carpenters tools
 

Pretty sure they are 50hz

Re: Carpenters tools
 

I've got plenty of 110 tools, and afew transformers, no problems at all. Bring the transformers with you though as you won't get them here (not that I know of anyway)

The site tools in the uk are 110vac and are run off 240/110 (50Hz) centre tapped transormers so the maximum belt you'll get is 55v, all to do with safety.

Re: Carpenters tools
 

Ok, things have obviously changed since I left the UK in 1983!! Everything was 240V back then.

Having said that, I have never seen 110V tools being used on building sites over here, so if you want to bring yours over you will have to supply your own transformer to run them. As far as I know the regulations over here require all tools on site to be powered via an ELCB or similar safety switch.

When I first arrived here I was surprised to see standard 240V power points in bathrooms - they hadn't been legal in the UK for some time by then.

Re: Carpenters tools
 

Bring everything tools are more expensive out here. ibrought all my 110 tools with me and im still using them they do get some funny looks from the aussie tradies when you get them out the van. you will also need to get them all tagged and tested before you can take them on site.

Re: Carpenters tools
 

tricky one, you carnt "legally" tag n test a 110v tranny for site use as the output 110v is electricaly seperate to the input 240v, and if a fault occurs on the output the rcd protecting the 240v primary circuit wont trip
so its not stricktly correct to use on on an au building site having said that my own opinion is that the 110v tranny is far far safer than relying on an rcd
but unfortunuttly i dont write the regs

Re: Carpenters tools
 

theres a guy up here on the sunny coast that tags them for me . your right what you said about them being safer.i will use them untill they wear out and then replace them with 240

Re: Carpenters tools
 

I'm really surprised your getting away with that.
Have you never been pulled?

Re: Carpenters tools
 

Bring as many tools as you can! I brought a tranny as I had 110v tools that I still use on a daily basis and will use them until the transformer gives up then either get a tranny sent over or sell the tools on Ebay UK.

Heavy bastards to lump about with you though!

Re: Carpenters tools
 

not had a problem so far so i will keep using them till i do:thumbup:

Re: Carpenters tools
 

Hi, I'm thinking of buying a heat seaming iron from the UK, as they're half the price compared to over here, it's a 230v, so I'm assuming all that I'll need to do is change the plug to an Aussie one :confused:

Re: Carpenters tools
 

Yep just change the plug lol
Of course you'll have to get a licenced sparky to do that as it's way beyond the realms of a mere mortal to do such a thing here in Qld. Never mind that as an 11 yr old Pommy boy scout you got a badge for being able to do just!:blink:

Re: Carpenters tools
 

isnt that because your average 12 yr old pommy boy has more sense ? :rofl: