1. Cleaning board
Rinse board with plain water after every use. To clean off any dirt, old art work you may have drawn on use our
very own BSC BOARD CLEANER & WAX REMOVAL. This is a natural nontoxic cleaner which will make
your board look like new. Remember to watch out for your board's decals as the BSC board cleaner will also
remove these. For wax removal, let board warm up in the sun for a few minutes, (or use hair dryer) then scrape off
old wax with stiff cardboard. Then use BSC board cleaner to clean it free of all wax. Wipe off immediately after
with plain water

2. Delaminations
Attend to these ASAP, as the bigger they are the harder they are to fix. Generally most tail rail & nose delams are small
to a few inches long, clean out any sand and water using a paddle pop stick and a chamois making sure it is clean & dry.
Squirt hot glue quickly in uniform lines onto the core foam and then hold in place for a few minutes. On the outer seam
put another small bead of hot glue or blob repair to seal it. Larger delamination if you have on of these then generally
you have been a real slack ass and did not attend to it ASAP. In most cases a large delam is beyond repair. You can try
and use blob repair, smear it over the core in sections pressing firmly as you go. Once you have reapplied the
delaminated section seal it off with hot glue.