British Expats

British Expats (https://britishexpats.com/forum/)
-   Spain (https://britishexpats.com/forum/spain-75/)
-   -   problem wall (https://britishexpats.com/forum/spain-75/problem-wall-649545/)

celestine Jan 16th 2010 12:06 am

problem wall
 
Good afternoon all. We have an internal wall that is external within the confines of the ajoining non occupied property. The paint has blown and appears visibly damp in areas {I assume causing the paint to blow}. Is there a barrier that can be added to paint, a specific paint, or any product of any description that can help to solve this problem? Would using an external paint inside be of any use?

Many thanks for your anticipated help. We are still learning the ins and outs of Spanish home maintenance. C:fingerscrossed:

Hillybilly Jan 16th 2010 12:21 am

Re: problem wall
 
You won't solve any damp problem by using any form of external or non-breathable plastico paint inside - you will merely disguise the problem for a short period of time and in doing so cause the structure of the wall itself to degrade and damp to climb upwards within the wall etc.
If you want to actually solve the problem, not disguise it, you need to take off ALL the old wall coating (render/plaster?) to expose the masonry beneath and re-render using a lime mortar. Lime mortars allow water vapour to harmlessly evaporate from the wall. Repaint using only distemper or other breathable paints. Keep furniture away from the wall in question (i.e. don't plonk a bookcase right up in front of it!) & heat and ventilate the room to allow harmless dispersal and evaporation of the water vapour.
An alternative way of "dealing with" damp walls is to construct a false wall in front of the affected one, incorporating a cavity, insulation if required, and a vapour barrier. This could be brick or stud partition.
If you have access to next door, first have a look to see that there is not anything more serious than "normal" rising damp causing the problem though.

celestine Jan 16th 2010 1:05 am

Re: problem wall
 

Originally Posted by Hillybilly (Post 8253788)
You won't solve any damp problem by using any form of external or non-breathable plastico paint inside - you will merely disguise the problem for a short period of time and in doing so cause the structure of the wall itself to degrade and damp to climb upwards within the wall etc.
If you want to actually solve the problem, not disguise it, you need to take off ALL the old wall coating (render/plaster?) to expose the masonry beneath and re-render using a lime mortar. Lime mortars allow water vapour to harmlessly evaporate from the wall. Repaint using only distemper or other breathable paints. Keep furniture away from the wall in question (i.e. don't plonk a bookcase right up in front of it!) & heat and ventilate the room to allow harmless dispersal and evaporation of the water vapour.
An alternative way of "dealing with" damp walls is to construct a false wall in front of the affected one, incorporating a cavity, insulation if required, and a vapour barrier. This could be brick or stud partition.
If you have access to next door, first have a look to see that there is not anything more serious than "normal" rising damp causing the problem though.

thanks for the information:thumbsup:

snikpoh Jan 16th 2010 3:07 am

Re: problem wall
 
Alternatively you could use the appropriate SIKA product. SIKA 1 is added to the render mix to provide a damp barrier and then SIKA TOPCOAT is applied before paintiung as normal.

However, as said previously, this doesn't solve the original ingress of damp. The only way to do that is to install a damp course (generally unknown in Spain) or to apply the above rendering to BOTH sides of the wall.

WE have a basement flat where we have usedf both methods (SIKA for one wall and a CAMRA wall for the other) - I favour the 'dummy', CAMRA wall but all this really does is to 'hide' the problem.

Best of luck, damp in Spain can be a real issue which the Spanish never really deal with properly (IMHO)!

Hillybilly Jan 16th 2010 6:02 am

Re: problem wall
 

Originally Posted by snikpoh (Post 8254076)
CAMRA wall

? Not sure what you mean by this?
cámara de aire?
Basement (i.e. below ground) walls require different treatment to walls that are above ground but damp.

celestine Jan 16th 2010 10:49 am

Re: problem wall
 

Originally Posted by snikpoh (Post 8254076)
Alternatively you could use the appropriate SIKA product. SIKA 1 is added to the render mix to provide a damp barrier and then SIKA TOPCOAT is applied before paintiung as normal.

However, as said previously, this doesn't solve the original ingress of damp. The only way to do that is to install a damp course (generally unknown in Spain) or to apply the above rendering to BOTH sides of the wall.

WE have a basement flat where we have usedf both methods (SIKA for one wall and a CAMRA wall for the other) - I favour the 'dummy', CAMRA wall but all this really does is to 'hide' the problem.

Best of luck, damp in Spain can be a real issue which the Spanish never really deal with properly (IMHO)!

thanks:fingerscrossed::thumbsup:

painterhombre Jan 16th 2010 9:46 pm

Re: problem wall
 
a very interesting thread, and "right up my street" for once. Here are some linsk to stuff i have written in the past about damp and house problems, i hope some info is of help. :thumbsup:

http://www.neverpaintagain.co.uk/art...-effects-howto

http://www.neverpaintagain.co.uk/article/more-top-tips

http://www.neverpaintagain.co.uk/art...ring-tips-info

http://www.neverpaintagain.co.uk/art...e-masonry-wall

http://www.neverpaintagain.co.uk/art...g-damp-reissue

(the above are original articles by me on my site are NOT adverts! just in case anyone wondered) but if you look around the site there is far more info than on the links above.

jdr Jan 17th 2010 12:56 am

Re: problem wall
 

Originally Posted by painterhombre (Post 8255883)
a very interesting thread, and "right up my street" for once. Here are some linsk to stuff i have written in the past about damp and house problems, i hope some info is of help. :thumbsup:

Snip.....

(the above are original articles by me on my site are NOT adverts! just in case anyone wondered) but if you look around the site there is far more info than on the links above.

Why don`t you read rule 9 and instead of promoting your site put the address in your sig ?

painterhombre Jan 17th 2010 1:07 am

Re: problem wall
 

Originally Posted by jdr (Post 8256243)
Why don`t you read rule 9 and instead of promoting your site put the address in your sig ?

oh dear i was waiting for this. :confused:

amigo, i assure you my business is extremely successful and i dont need to advertise more than i already do, and i am well aware of the rules, which is why i didnt add the links with the editor thing and stuff loads of keywords in the links. The OP posted something highly relevant to my specialism. I was trying to help by showing links to the info they wanted instead of filling up the page with copies and pasted info, which being then duplicate content, would or may affect my website traffic.........

...............which is why i offered a but of pro help to the people thats is all, sorry. if the post i did is a no on then just delete it, sorry was only trying to be helpful :(

jdr Jan 17th 2010 1:10 am

Re: problem wall
 

Originally Posted by painterhombre (Post 8256274)
oh dear i was waiting for this. :confused:

amigo, i assure you my business is extremely successful and i dont need to advertise more than i already do, and i am well aware of the rules, which is why i didnt add the links with the editor thing and stuff loads of keywords in the links. The OP posted something highly relevant to my specialism. I was trying to help by showing links to the info they wanted instead of filling up the page with copies and pasted info, which being then duplicate content, would or may affect my website traffic.........

...............which is why i offered a but of pro help to the people thats is all, sorry. if the post i did is a no on then just delete it, sorry was only trying to be helpful :(

Not my call anymore, but I was just trying to help too. ;-))

twistedmelon Jan 17th 2010 1:25 am

Re: problem wall
 
As suggested I removed all old plaster and put a coat of Rehuetor plaster on it, then I painted it with a mixture of emulsion and clear varnish ( spanish tip) and had no probs since.


All times are GMT -12. The time now is 9:16 am.

Powered by vBulletin: ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.