Any CNC Engineers in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone
#1
Any CNC Engineers in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone
Hey all,
Does anybody on this site work as a cnc engineer in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone.
If so please could you inform me if there is a shortage of them in these areas as that is what i am going to do (hopefully in these towns).
Many Thanks
Tony
Does anybody on this site work as a cnc engineer in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone.
If so please could you inform me if there is a shortage of them in these areas as that is what i am going to do (hopefully in these towns).
Many Thanks
Tony
#2
Never been to Australia
Joined: Oct 2004
Location: Homeless
Posts: 495
Re: Any CNC Engineers in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone
Originally Posted by SonjaNTony
Hey all,
Does anybody on this site work as a cnc engineer in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone.
If so please could you inform me if there is a shortage of them in these areas as that is what i am going to do (hopefully in these towns).
Many Thanks
Tony
Does anybody on this site work as a cnc engineer in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone.
If so please could you inform me if there is a shortage of them in these areas as that is what i am going to do (hopefully in these towns).
Many Thanks
Tony
Mate of mine is a CNC service engineer, same as me, and has just come back from Melbourne.
He worked for an agent that covered the whole of Aus so knows most areas.
If you can be more specific I'll ask him.
Kevin
#3
Joined: Dec 2003
Posts: 7,834
Re: Any CNC Engineers in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone
Originally Posted by SonjaNTony
Hey all,
Does anybody on this site work as a cnc engineer in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone.
If so please could you inform me if there is a shortage of them in these areas as that is what i am going to do (hopefully in these towns).
Many Thanks
Tony
Does anybody on this site work as a cnc engineer in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone.
If so please could you inform me if there is a shortage of them in these areas as that is what i am going to do (hopefully in these towns).
Many Thanks
Tony
hubby says u should have no probs what so ever getting a job....especially in Mackay
#4
Re: Any CNC Engineers in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone
Originally Posted by kevinl
Do you mean a CNC service engineer, a programmer, a production engineer or a machinist ?
Mate of mine is a CNC service engineer, same as me, and has just come back from Melbourne.
He worked for an agent that covered the whole of Aus so knows most areas.
If you can be more specific I'll ask him.
Kevin
Mate of mine is a CNC service engineer, same as me, and has just come back from Melbourne.
He worked for an agent that covered the whole of Aus so knows most areas.
If you can be more specific I'll ask him.
Kevin
Hi Kevin,
I am a CNC machinist (miller)
Thanks
Tony
#5
Forum Regular
Joined: Sep 2003
Location: Bayside
Posts: 93
Re: Any CNC Engineers in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone
I don't know what a CNC engineer is or does - however I do know a little about Rocky, Bundy, Mackay etc and basically anything with "engineer" in it is very saught after and on a good wage. Its very difficult to find any staff in these regions as the place is booming.
#6
Re: Any CNC Engineers in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone
Originally Posted by Brizbound
I don't know what a CNC engineer is or does - however I do know a little about Rocky, Bundy, Mackay etc and basically anything with "engineer" in it is very saught after and on a good wage. Its very difficult to find any staff in these regions as the place is booming.
Cheers
Tony
#7
Never been to Australia
Joined: Oct 2004
Location: Homeless
Posts: 495
Re: Any CNC Engineers in Mackay, Townsville, Bundaberg, Rockhampton or Gladstone
I have spoken to my mate today.
His company didn't have any customers up that far.
Lots around Brisbane and the Gold Coast but none much further north.
He thinks there are firms up there, just not as many as Melbourne, Sydney and Brisbane.
Judging by the general skills shortage you should be ok.
Most machines are Fanuc control or Mazaks with Mazatrol, some Mitsubushi, hardly any Heidenhain or Siemans.
Only fly in the ointment is wages, not great anywhere $45,000 was a reasonable starting wage for a setter/programmer in Melbourne, don't know if you would end up with more or less money by being away from the main areas.
One of the reasons my mate came home was the poor pay.
Why these areas ?
PM me if you want any more info.
Kevin
His company didn't have any customers up that far.
Lots around Brisbane and the Gold Coast but none much further north.
He thinks there are firms up there, just not as many as Melbourne, Sydney and Brisbane.
Judging by the general skills shortage you should be ok.
Most machines are Fanuc control or Mazaks with Mazatrol, some Mitsubushi, hardly any Heidenhain or Siemans.
Only fly in the ointment is wages, not great anywhere $45,000 was a reasonable starting wage for a setter/programmer in Melbourne, don't know if you would end up with more or less money by being away from the main areas.
One of the reasons my mate came home was the poor pay.
Why these areas ?
PM me if you want any more info.
Kevin