Fabricator/welder in GC
#1
Fabricator/welder in GC
Hi, first time on here.
Can anyone give me any idea on wages for a fabricator/welder in the GC area. Also what sort of licensing do i need when i get there? TRA stuff due back in next week.
Thanks
Trevor
Can anyone give me any idea on wages for a fabricator/welder in the GC area. Also what sort of licensing do i need when i get there? TRA stuff due back in next week.
Thanks
Trevor
#2
BE Forum Addict
Joined: Jul 2007
Location: Brisbane
Posts: 2,949
Re: Fabricator/welder in GC
Hi - can't help with your question but I'd be intrigued to know as well!! My fella is a welder/fabricator specialising in aluminium and light gauge steel - what sort do you do? how did you find your TRA forms? (so many questions!!! sorry!!)
#3
Re: Fabricator/welder in GC
hi, i work with thick and thin steel,structural and sheet as well as aluminium and stainless. The TRA stuff wouldn't have been as bad if i had thought to save every bit of paperwork i've ever received in relation to work in the last 23 years!! We should have an answer within a week or so..has your OH tried to contact any employers yet? I read on another thread that exp07 is a good place to get in touch with employers.
thanks
Trevor
thanks
Trevor
#4
Niamh,Paul + 4 :)
Joined: Jul 2007
Location: sunshine coast, now back home in Ireland :)
Posts: 1,861
Re: Fabricator/welder in GC
hi, i work with thick and thin steel,structural and sheet as well as aluminium and stainless. The TRA stuff wouldn't have been as bad if i had thought to save every bit of paperwork i've ever received in relation to work in the last 23 years!! We should have an answer within a week or so..has your OH tried to contact any employers yet? I read on another thread that exp07 is a good place to get in touch with employers.
thanks
Trevor
thanks
Trevor
when my husband was over in Australia back in April he was told you can earn from 1000 oz dollars upwards a week all depends were you were working out side Brisbane nearer the 1000 mark but there is a lot of building in Brisbane so you can earn pretty good money there we have friends living over in the sunshine coast and they were checking it out for us put that back in to euros and its very good money epically when you compare the rate of living is lower in Australia to here
Last edited by Baby75; Jul 18th 2007 at 11:18 pm.
#5
Account Closed
Joined: Apr 2006
Posts: 10,784
Re: Fabricator/welder in GC
ultimately, with say 6-4.30 mon to fri and the odd sat morning you can expect to gross over $80,000, although not everyone wants to do extra hours.
conditions in most shops are very like uk.
good luck!
#6
Account Closed
Joined: Apr 2006
Posts: 10,784
Re: Fabricator/welder in GC
sorry jumping in we are gathering all our information for the TRA they are looking for certified true copies what is that. we have all the trade papers my husband is a welder/frabicator as well he has got references from places he worked in before is that enough what paper work do you need sorry about all the questions.
when my husband was over in Australia back in April he was told you can earn from 1000 oz dollars upwards a week all depends were you were working out side Brisbane nearer the 1000 mark but there is a lot of building in Brisbane so you can earn pretty good money there we have friends living over in the sunshine coast and they were checking it out for us put that back in to euros and its very good money epically when you compare the rate of living is lower in Australia to here
when my husband was over in Australia back in April he was told you can earn from 1000 oz dollars upwards a week all depends were you were working out side Brisbane nearer the 1000 mark but there is a lot of building in Brisbane so you can earn pretty good money there we have friends living over in the sunshine coast and they were checking it out for us put that back in to euros and its very good money epically when you compare the rate of living is lower in Australia to here
ultimately you should earn a similar salary to the uk, but may have to move around or prove yourself to get there.
#7
Niamh,Paul + 4 :)
Joined: Jul 2007
Location: sunshine coast, now back home in Ireland :)
Posts: 1,861
Re: Fabricator/welder in GC
don't think it's cheaper here. in my opinion it is, but only very slightly. some may find it more expensive depending on circumstances. it is very much swings and roundabouts.
ultimately you should earn a similar salary to the uk, but may have to move around or prove yourself to get there.
ultimately you should earn a similar salary to the uk, but may have to move around or prove yourself to get there.
but i guess we will have to go over expecting a lower wage just in case so any thing after that will be a bonus
#8
Account Closed
Joined: Apr 2006
Posts: 10,784
Re: Fabricator/welder in GC
Guess ill have to do some research so i am comparing house prices and food shopping to Ireland I live in Dublin and the houses prices are mad for example if you wanted to buy a 4 bed house in a nice area you would be looking at 600,000 euro which is 941,118.00 oz dollars depending on the area the same house. in Australia i found a 4 bed 2 bathroom house for $347,000 which is 221,267.34 euro that a good difference we would have to move to the arse whole of no were to afford a house here but when we go over we are planning on renting on till we are sure of what we are going to do. ill have to find out more on food and that
but i guess we will have to go over expecting a lower wage just in case so any thing after that will be a bonus
but i guess we will have to go over expecting a lower wage just in case so any thing after that will be a bonus
at the end of the day there is much more to a move to another country than being better off, but no one wants to be a lot worse off. do a lot of research and don't wear rose tints and all will be fine
#9
Re: Fabricator/welder in GC
if you're moving from dublin the house prices will be cheaper. it's all relative eh?
at the end of the day there is much more to a move to another country than being better off, but no one wants to be a lot worse off. do a lot of research and don't wear rose tints and all will be fine
at the end of the day there is much more to a move to another country than being better off, but no one wants to be a lot worse off. do a lot of research and don't wear rose tints and all will be fine
#10
Niamh,Paul + 4 :)
Joined: Jul 2007
Location: sunshine coast, now back home in Ireland :)
Posts: 1,861
Re: Fabricator/welder in GC
if you're moving from dublin the house prices will be cheaper. it's all relative eh?
at the end of the day there is much more to a move to another country than being better off, but no one wants to be a lot worse off. do a lot of research and don't wear rose tints and all will be fine
at the end of the day there is much more to a move to another country than being better off, but no one wants to be a lot worse off. do a lot of research and don't wear rose tints and all will be fine
thanks for replying
#12
Re: Fabricator/welder in GC
Hi,
My hubby passed the TRA as first class welder, we had to gather A LOT of evidence, especially since he is self eployed, but luckily the application sailed through(it was 2 weeks bloody hard work to get there though, but worth it!) Just had acknowledgment of visa 136, and now we wait. We haven't got much idea about the certificate (artc???) he MAY need when/if we arrive before he commences work, can anybody give specific's please?
Thanks,
Michelle, Henk and kids............
My hubby passed the TRA as first class welder, we had to gather A LOT of evidence, especially since he is self eployed, but luckily the application sailed through(it was 2 weeks bloody hard work to get there though, but worth it!) Just had acknowledgment of visa 136, and now we wait. We haven't got much idea about the certificate (artc???) he MAY need when/if we arrive before he commences work, can anybody give specific's please?
Thanks,
Michelle, Henk and kids............
#13
aka DORIS
Joined: Sep 2006
Location: qld
Posts: 1,584
Re: Fabricator/welder in GC
Gold Coast, Qld
#14
Re: Fabricator/welder in GC
Gold coast. A word of warning to fab/welders coming over. You are deemed a boilermaker so welders could be expected to read drawings and platers could be expected to do a weld test. Had to do two plates (vert and o/head) but being a welder, I finished them very quickly and guy was very impressed. Because I finished the plates very fast, he kept me welding all the time I was there. Was on $28 casual then $25 permanent. Started another job 1mth ago. $35 on the back shift and all o/t at double time but paid off when work got slow. Start another job in a couple of weeks as I'm not in a rush after getting a big tax rebate Welding with innershield wire which I'm not too happy about but I'll give it a go. Millions of work in Northern Qld.
#15
Niamh,Paul + 4 :)
Joined: Jul 2007
Location: sunshine coast, now back home in Ireland :)
Posts: 1,861
Re: Fabricator/welder in GC
Gold coast. A word of warning to fab/welders coming over. You are deemed a boilermaker so welders could be expected to read drawings and platers could be expected to do a weld test. Had to do two plates (vert and o/head) but being a welder, I finished them very quickly and guy was very impressed. Because I finished the plates very fast, he kept me welding all the time I was there. Was on $28 casual then $25 permanent. Started another job 1mth ago. $35 on the back shift and all o/t at double time but paid off when work got slow. Start another job in a couple of weeks as I'm not in a rush after getting a big tax rebate Welding with innershield wire which I'm not too happy about but I'll give it a go. Millions of work in Northern Qld.
thanks