Go Back   British Expats / Living & Moving Abroad / Australia / Immigration, Visas & Citizenship (Australia)

Closed Thread
 
Thread Tools
Old Sep 28th 2010, 12:35 pm   #1
Forum Regular
 
shooterspalace's Avatar
 
Joined: Feb 2010
Posts: 90
shooterspalace is an unknown quantity at this point
Default Query about ICT Business Analyst (ANZSCO Code- 261111)

I have been doing job in IT sector since last 6 years. My work area is Network, System and Security Administration and it is also related to Organization's Business Analysis and requirement fullfillment. Previously, my skill was assessed by ACS as "Network Security Specialist (ASCO Code 2231-79) " on 29 April' 2010. Now in the Schedule-3 or Schedule-4 , it is not there. So, I am very much worried to choose the right ANZSCO Code.

Now can I apply for fresh skill assessment as " ICT Business Analyst" (ANZSCO Code- 261111, Schedule-3) based on my work experience and skill areas?

Does this occupation match my skills ?

Or it matches only for Software professionals?

I will be grateful if any senior member /Expert gives a positive opinion.

Thanks and regards

Shooterspalace
shooterspalace is offline  
Sponsored Links
Old Sep 28th 2010, 2:01 pm   #2
BE Enthusiast
 
Joined: Aug 2009
Posts: 471
wookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nice
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

UNIT GROUP 2611 ICT BUSINESS AND SYSTEMS ANALYSTS


ICT BUSINESS AND SYSTEMS ANALYSTS work with users to formulate system requirements, develop system plans and documentation, review and evaluate existing systems, and design and modify systems to meet users' business needs.
Non-ICT Business Analysts (for example, Management Consultants) are excluded from this unit group. Non-ICT Business Analysts are included in Unit Group 2247 Management and Organisation Analysts.

Indicative Skill Level:
In Australia and New Zealand:

Most occupations in this unit group have a level of skill commensurate with a bachelor degree or higher qualification. At least five years of relevant experience and/or relevant vendor certification may substitute for the formal qualification. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification (ANZSCO Skill Level 1).

Tasks Include:
working with users to formulate and document business requirements
identifying, investigating, and analysing business processes, procedures and work practices
identifying and evaluating inefficiencies and recommending optimal business practices, and system functionality and behaviour
using project management methodologies, principles and techniques to develop project plans and to cost, resource and manage projects
taking responsibility for deploying functional solutions, such as creating, adopting and implementing system test plans, which ensure acceptable quality and integrity of the system
creating user and training documentation, and conducting formal training classes
developing functional specifications for use by system developers
using data and process modelling techniques to create clear system specifications for the design and development of system software
acting as a central reference and information source, providing guidance and assistance in the system project decision making process

Occupations:
261111 ICT Business Analyst
261112 Systems Analyst

261111 ICT BUSINESS ANALYST

Alternative Titles:
BA (ICT)
Business Consultant (ICT)

Identifies and communicates with users to formulate and produce a requirements specification to create system and software solutions.
Skill Level: 1

Specialisation:

Business Systems Analyst
261112 SYSTEMS ANALYST

Evaluates processes and methods used in existing ICT systems, proposes modifications, additional system components or new systems to meet user needs as expressed in specifications and other documentation.
Skill Level: 1

Tasks and Responsibilities

•Business Analyst is required to perform research into user interaction. Additionally, he is needed to make use of the information technology systems and see as to which are the areas where ease and efficiency could be enhanced.
•Coming out with new computer architecture and design and other computer techniques.
•Other tasks include testing latest information technology system along with taking care of the design problems, if any.
•Other tasks include acceptance testing
•Writing reports and analysis related to findings for publication
Qualification

•The minimum level of qualification required to qualify for Business Analyst is a bachelor degree or higher qualification
•Or have experience of a minimum of 5 years in the relevant field.
•In rare cases, both qualification as well as relevant experience is required to qualify for the same.
wookiee06 is offline  
Old Sep 28th 2010, 2:12 pm   #3
BE Enthusiast
 
Joined: Aug 2009
Posts: 471
wookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nice
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

If you dont match the duties above, you wont get the code

what are your duties?
wookiee06 is offline  
Old Sep 28th 2010, 4:09 pm   #4
Just Joined
 
Joined: Sep 2010
Posts: 4
zoxo is an unknown quantity at this point
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

Quote:
Originally Posted by wookiee06 View Post
If you dont match the duties above, you wont get the code

what are your duties?
I want also to apply under 'Applications and Analyst Programmer' , but i don't know from where to start, i have my MIS qualification taken outside Australia so should i have to directly apply to ACS assessment or use AEI-NOOSR to assess my qualification first. if this is done the Management Information System qualification will be taken as an ICT or not, your responses is so valuable to me and the forum as well.
zoxo is offline  
Old Sep 30th 2010, 11:29 am   #5
Forum Regular
 
shooterspalace's Avatar
 
Joined: Feb 2010
Posts: 90
shooterspalace is an unknown quantity at this point
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

Quote:
Originally Posted by shooterspalace View Post
I have been doing job in IT sector since last 6 years. My work area is Network, System and Security Administration and it is also related to Organization's Business Analysis and requirement fullfillment. Previously, my skill was assessed by ACS as "Network Security Specialist (ASCO Code 2231-79) " on 29 April' 2010. Now in the Schedule-3 or Schedule-4 , it is not there. So, I am very much worried to choose the right ANZSCO Code.

Now can I apply for fresh skill assessment as " ICT Business Analyst" (ANZSCO Code- 261111, Schedule-3) based on my work experience and skill areas?

Does this occupation match my skills ?

Or it matches only for Software professionals?

I will be grateful if any senior member /Expert gives a positive opinion.

Thanks and regards

Shooterspalace
Quote:
Originally Posted by wookiee06 View Post
If you dont match the duties above, you wont get the code

what are your duties?

Wookiee06,

Sorry for late reply.

My Job responsibilites is related to Network, System and Security Administration related to organization's business analysis and requirement fullfillment. These are mentioned below......

-Understand, analyze and documented the business process and requirement as per ERP Team’s functional experience, Organization’s Management and End User’s work practice to plan for implementing new Network and Server project.

-Understanding, indentifying and reviewing the Networks system Design for both present and future problem-solving and decision-making.

‐Assist IT support team related to network and systems support at head office and remote offices.

-Find out complex problems (in Networks, PCs, Servers, and Operating Systems, ERP Application Software and SQL Server 2000 database) and review the associated information to develop and evaluate multiple options and implement solution.

-Co‐ordinate in yearly IT budget, Evaluate and select the future outcomes against costing for any IT project implementation such as VPN Connection, Fiber Optics and Radio Link, PCs, Servers, Operating Systems, Application Software, Switch, routers, Printers, Storage device, power backup system and implement those for Remote offices and Head Office as per the business needs of Higher Management and ERP Team.

-Perform trail and test run of the PCs, Servers, Operating Systems, network devices and application software for ERP user to evaluate the quality and performance before running the main project live.

-Implement, Manage and maintain networks (LAN, WAN, wireless LAN and wireless security (WEP, WPA, WPA2), Fiber Optics and Radio Link implementation project) and systems equipments including Ethernet switches, routers, security appliances, PCs, servers, storages, power backup system to keep smoothing the ERP Solution operation at different locations at head office and remote offices.

‐Installation, configuration and troubleshooting of ZyWALL firewall/security appliances, LINKSYS vpn routers and Cisco routers for remote office VPN connectivity, network security and routing and also secure dial‐up remote access solutions using GPRS/EDGE modems.

‐Administration and troubleshooting of GRE, IPSec, IKE, ACL for branch office vpn, Windows 2003 servers Domain Controllers and Group Policy Object (account policy, object access audit policy, user rights assignment, objects and attributes restriction) and IIS, DNS, DHCP, RRAS L2TP VPN on Windows 2003 for roaming VPN users.

‐Configure, administration and troubleshooting of IPTABLES, NAT, port redirection and Squid proxy on Linux for secure Internet access, vs‐ftpd, sftp, ssh on Linux, SMTP filtering, anti‐spam, anti virus for secure email service using Qmail, SpamAssassin, ClamAV, and SimScan.

‐Administration and troubleshooting of client/server based antivirus administration for data security, data protection, and threat management by using Kaspersky Administration Kit.

-Manage and maintain resource allocation and utilization such as Network Devices, PCs, Servers, Switches, Routers, Printers, Storage Devices and Power Backup System in Remote Office and Head Office.

‐Monitoring and analyzing of network traffic using windows network monitor, IPSec monitor.

‐Administering backup/restore of all systems and user applications data to ensure the optimum quality of uptime.

-Work out with choosing instructional methods and procedures suitable for the situation for Network, Security and Servers Systems Technology, prepare and review User Manual and Technical training documentation and provide training to upgrade team members and End User to face the future business requirement and operational issues.

- Assist and co-ordinate ERP Team to migrate the Software Application and database from Old Sales & Distribution System Software (MS Access) to ERP software and SQL Server Database.

-Making co-ordination as a key person between Infrastructure and ERP Team to ensure the total quality, uptime, integration and smoothness of Service.

-Co‐ordinate with IT vendors for support claim and warranty.


@Wookiee06 , now you please give your opinion after reading this and previous message.


Best regards

Shooterspalace
shooterspalace is offline  
Old Sep 30th 2010, 11:43 am   #6
BE Enthusiast
 
Joined: Aug 2009
Posts: 471
wookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nice
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

look at Computer Network and Systems Engineer - ANZSCO 263111
Occupation: 263111 - Computer Network & Systems Engineer

Plans, develops, deploys, tests and optimises network and system services, taking responsibility for configuration management and overall operational readiness of network systems, especially environments with multiple operating systems and configurations, and provides troubleshooting and fault-finding services for network problems.

Skill Level:
The entry requirement for this occupation is a bachelor degree or higher qualification and at least 5 years of relevant experience and/or relevant vendor certification may substitute for the formal qualification. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification (ANZSCO Skill Level 1).

Tasks Include:

•analysing, developing, interpreting and evaluating complex system design and architecture specifications, data models and diagrams in the development, configuration and integration of computer systems
•researching, analysing, evaluating and monitoring network infrastructure to ensure networks are configured to operate at optimal performance
•assessing and recommending improvements to network operations and integrated hardware, software, communications and operating systems
•providing specialist skills in supporting and troubleshooting network problems and emergencies
•installing, configuring, testing, maintaining and administering new and upgraded networks, software database applications, servers and workstations
•providing network programming in support of specific business needs and requirements
•preparing and maintaining procedures and documentation for network inventory, and recording diagnosis and resolution of network faults, enhancements and modifications to networks, and maintenance instructions
•monitoring network traffic, and activity, capacity and usage to ensure continued integrity and optimal nework performance
Specialisations:
Computer Network Engineer
Computer Systems Integrator


http://www.abs.gov.au/AUSSTATS/ABS@....+Professionals

http://www.immi.gov.au/asri/occupati...s-engineer.htm

Last edited by wookiee06; Sep 30th 2010 at 11:46 am. Reason: fffffffffffffff
wookiee06 is offline  
Old Sep 30th 2010, 12:19 pm   #7
Forum Regular
 
shooterspalace's Avatar
 
Joined: Feb 2010
Posts: 90
shooterspalace is an unknown quantity at this point
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

Quote:
Originally Posted by wookiee06 View Post
look at Computer Network and Systems Engineer - ANZSCO 263111
Occupation: 263111 - Computer Network & Systems Engineer

Plans, develops, deploys, tests and optimises network and system services, taking responsibility for configuration management and overall operational readiness of network systems, especially environments with multiple operating systems and configurations, and provides troubleshooting and fault-finding services for network problems.

Skill Level:
The entry requirement for this occupation is a bachelor degree or higher qualification and at least 5 years of relevant experience and/or relevant vendor certification may substitute for the formal qualification. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification (ANZSCO Skill Level 1).

Tasks Include:

•analysing, developing, interpreting and evaluating complex system design and architecture specifications, data models and diagrams in the development, configuration and integration of computer systems
•researching, analysing, evaluating and monitoring network infrastructure to ensure networks are configured to operate at optimal performance
•assessing and recommending improvements to network operations and integrated hardware, software, communications and operating systems
•providing specialist skills in supporting and troubleshooting network problems and emergencies
•installing, configuring, testing, maintaining and administering new and upgraded networks, software database applications, servers and workstations
•providing network programming in support of specific business needs and requirements
•preparing and maintaining procedures and documentation for network inventory, and recording diagnosis and resolution of network faults, enhancements and modifications to networks, and maintenance instructions
•monitoring network traffic, and activity, capacity and usage to ensure continued integrity and optimal nework performance
Specialisations:
Computer Network Engineer
Computer Systems Integrator


http://www.abs.gov.au/AUSSTATS/ABS@....+Professionals

http://www.immi.gov.au/asri/occupati...s-engineer.htm

Wookiee06,

Thanks for your reply.

Computer Network and Systems Engineer (ANZSCO 263111) is existed only in Schedule-4. But ICT Business Analyst (ANZSCO Code- 261111) is existed in both Schedule-3 and Schedule-4. So, there is opportunity in both 175 and 176 Category.

So my question is that, does my overall job duties match with the requirement of ICT Business Analyst (ANZSCO Code- 261111) ?
If so, then I shall apply to ACS for skill assessment with this Code as soon as possible.
Otherwise I have to think for Computer Network and Systems Engineer (ANZSCO 263111).

Your valuable suggestions/opinions will help me to take a solid decision.

Thanks and best regards

Shooterspalace
shooterspalace is offline  
Old Sep 30th 2010, 12:44 pm   #8
BE Enthusiast
 
Joined: Aug 2009
Posts: 471
wookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nicewookiee06 is just really nice
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

only duties related to be BA

-Understand, analyze and documented the business process and requirement as per ERP Team’s functional experience,

-Understanding, indentifying and reviewing the Networks system Design

-review the associated information to develop and evaluate multiple options a

-Co‐ordinate in yearly IT budget,

-Evaluate and select the future outcomes against costing for any IT project implementation

rest is not, only 5% of your role is related to a BA

have you looked:

263312 - Telecommunications Network Engineer

(Communications Consultants, Communications Specialist (ICT), Telecommunications Consultant, Telecommunications Specialist)

Plans, designs and monitors complex telecommunications networks and associated broadcasting equipment.

Skill Level:
The entry requirement for this occupation is a bachelor degree or higher qualification. At least 5 years of relevant experience and/or relevant vendor certification may substitute for the formal qualification. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification (ANZSCO Skill Level 1).

Tasks Include:

•planning, designing, building, configuring and commissioning telecommunications devices, networks and systems, such as voice, radio, two-way, data, microwave, satellite and digital data systems, and ensuring telecommunications systems interconnect with equipment from different manufacturers, service providers and users
•compiling engineering project proposals to define goals, identify scope, background and need, and ascertain cost of equipment, parts and services
•evaluating and procuring new products and services from vendors
•ensuring compliance with laws, regulations, policies and procedures in the provision of telecommunications systems
•selecting and developing new telecommunications sites by locating sites, filing documents, drawing up documents for approval, drafting construction drawings and following through to approval
•determining appropriate configurations of telecommunications hardware and software, ensuring desired performance of telecommunications equipment
•preparing and interpreting specifications, drawings and regulations for the use of telecommunications equipment
•determining the type and arrangement of circuits, transformers, circuit-breakers, transmission lines and equipment
•identifying and analysing problems and needs of existing telecommunications system, such as interference, intelligibility and clarity, to determine the most appropriate means of reducing, eliminating and avoiding current and future problems and improve communications
•monitoring telecommunications systems to assess need for updates, upgrades, enhancements, preventive maintenance and new systems
•assessing performance levels of system hardware and software to project future needs, and developing short- and long-terms plans for updating equipment, adding capabilities, enhancing existing systems and providing improved telecommunications
http://www.australia-migration.com/page/263312/610

Last edited by wookiee06; Sep 30th 2010 at 12:54 pm. Reason: net
wookiee06 is offline  
Old Oct 14th 2010, 10:58 am   #9
Forum Regular
 
Joined: Jul 2010
Posts: 45
srhjafry is an unknown quantity at this point
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

Quote:
Originally Posted by shooterspalace View Post
Wookiee06,

Thanks for your reply.

Computer Network and Systems Engineer (ANZSCO 263111) is existed only in Schedule-4. But ICT Business Analyst (ANZSCO Code- 261111) is existed in both Schedule-3 and Schedule-4. So, there is opportunity in both 175 and 176 Category.

So my question is that, does my overall job duties match with the requirement of ICT Business Analyst (ANZSCO Code- 261111) ?
If so, then I shall apply to ACS for skill assessment with this Code as soon as possible.
Otherwise I have to think for Computer Network and Systems Engineer (ANZSCO 263111).

Your valuable suggestions/opinions will help me to take a solid decision.

Thanks and best regards

Shooterspalace


Shooterpalace,


What final decision have you made for selection occupation?. I somehow belong to the same situation as you are facing so i need to have some advise from your side.

Thanks wookie for your expert comments... appreciate your help in future as well.
srhjafry is offline  
Old Oct 14th 2010, 12:08 pm   #10
Forum Regular
 
shooterspalace's Avatar
 
Joined: Feb 2010
Posts: 90
shooterspalace is an unknown quantity at this point
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

Quote:
Originally Posted by srhjafry View Post
Shooterpalace,


What final decision have you made for selection occupation?. I somehow belong to the same situation as you are facing so i need to have some advise from your side.

Thanks wookie for your expert comments... appreciate your help in future as well.
Srhjafry,

Still I can not take decision for new ACS assessment under ICT Business Analyst(261111). Senior Member Wookie gave some idea and helped me to think more about it. Now, I am trying to gather idea from some people who got ACS Assessment (2231-79, Network Security Specialist) previously and recently got ACS Re-assessment under the ICT Business Analyst (261111).

You just keep checking the threads/posts related to ICT Business Analyst in this forum. I think you will also be able to find your solution. If I make my decision then I will inform you.

Regards

Shooterspalace
shooterspalace is offline  
Old Oct 14th 2010, 12:44 pm   #11
Forum Regular
 
Joined: Jul 2010
Posts: 45
srhjafry is an unknown quantity at this point
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

Quote:
Originally Posted by shooterspalace View Post
Srhjafry,

Still I can not take decision for new ACS assessment under ICT Business Analyst(261111). Senior Member Wookie gave some idea and helped me to think more about it. Now, I am trying to gather idea from some people who got ACS Assessment (2231-79, Network Security Specialist) previously and recently got ACS Re-assessment under the ICT Business Analyst (261111).

You just keep checking the threads/posts related to ICT Business Analyst in this forum. I think you will also be able to find your solution. If I make my decision then I will inform you.

Regards

Shooterspalace

Thanks shooterpalace....we are now on the same page..... if i got something i will let u know ..and if you got something ..then do let me know...

Regards,
srhjafry is offline  
Old Oct 14th 2010, 12:52 pm   #12
BE Enthusiast
 
Joined: Sep 2008
Posts: 618
peaceboy is just really nicepeaceboy is just really nicepeaceboy is just really nicepeaceboy is just really nicepeaceboy is just really nicepeaceboy is just really nicepeaceboy is just really nicepeaceboy is just really nicepeaceboy is just really nicepeaceboy is just really nice
Cool Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

As the head of ICT Network Security & Infrastructure his direct duties and responsibilities include
 Understand, analyze and document the business processes and investigate & identify end user’s work practices, planning designing and implementing new business systems and networking communication systems.
 Understand, analyze and review the existing business networked systems, Document systems behaviors for future implementations and troubleshooting.
 New business systems implementations, total project management and documentation, cost benefit analysis, Provide vision to the minor staff to carry out their day to day functions of the systems & conduct training on the implemented business systems
 Understand, analyze and implement the BCP (Business Continuity Planning) and DRP (Disaster Recovery Planning) through proper techniques and backup strategies
 Act as the central point of contact for all the ICT related matters including purchasing of ICT equipment’s (Hardware/ Software). Analyze annual ICT costing’s and prepare annual budgets
 Analyze design & implements improvements in all areas of ICT network security & business systems
 Complies with the enterprise security policies & enforce the standards, policies and procedures, conduct awareness programs to the end users, conduct training programs to end users.
 Total business communications systems management, Analysis of existing business communications systems and designing, Management of MPLS network of intra site connectivity and international MPLS connectivity links, E1 communications links management, total communications security design & management.
 Design & mange the global DNS infrastructure and domain naming strategy, liaise with international ISP’s and domain registrants for DNS configurations & domain naming matters, total FTP/ WWW management.
 Oversee the administration strategies and maintenance of all business systems, servers, helpdesk activities
 Forecast on new technologies, strategies, business systems, ICT business systems analysis design & developments, new implementations & integrations.
 Identify analyze and provide standards for gathering information for use in trend analysis and reports information to company management
 Effectively communicate on relevant ICT related information & matters at all levels.
Given below are some of the major Projects that have been completed by (NAME).
01 Project Security solution for the Desktops PCs (350 + PC’s) for the Entire Region
Technology Involved Microsoft Fore Front client Security (FCS), Windows software Update Services (WSUS). System Center Configuration Manager (SCCM), Active Directory Group Policy and Symantec Endpoint Security
Duration 3 Months
Responsibility Analyzed & Designed and implemented the total solution at the regional level. And Managed the entire project
02 Project Total ICT infrastructure & Communication Platform for the Entire Region
Technology Involved ADDS Windows 2008 R2, Server Consolidation with Hyper - V, Symantec Mailbox Security, MS Exchange 2010 DAG, Unified Communication, File and printer server, Terminal Server 2008 R2, SCOM, SCVMM, MOSS, DFS, EFS, DPM, OCS
Duration 6 Months
Responsibility Analyzed & Designed and implemented the total solution at the regional level. And Managed the entire project
03 Project Total Security & Infrastructure Management Solution
Technology Involved Checkpoint firewall, Fortinet firewall & Iron Port Spam Filter
Nature of the Project Deployed Checkpoint and Fortinet firewalls as back to back firewalls, Deployed , Iron port to Encrypt the outgoing emails & prevent spam from entering the network
Duration 6 Months
Responsibility Analyzed & Designed the total solution, implemented the solution at the regional level and Managed the entire project
04 Project Conversion of the Frame Relay network to MPLS IP-VPN network
Technology Involved CISCO 1700 & 2500 Router Configuration at the regional level, management of the QOS, VIOP & Security IPSEC deployment at the Regional level. MPLS VPN links configuration
Duration 2 Weeks
Responsibility Analyzed & Designed the full solution and deployed at the regional level and Managed the entire project
05 Project E1 Communication System Deployment across the Entire Region
Technology Involved Wireless Microwave Point to Point Communication Links, 5 E1 Channels
Duration 2 Weeks
Responsibility Analyzed & Designed the topology, Communication Protocol Configuration, Total Project Management and Oversee the entire project at the regional level
06 Project Implementation of the Backup Network to the Existing MPLS VPN Network
Technology Involved WiMax Point to Point Communication Links
Duration 3 Months
Responsibility Analyzed & Designed the topology, Communication Protocol Configuration, Total Project Management and Oversee the entire project at the regional level
07 Project Implementation of the VIDEO Conferencing Network
Technology Involved POLYCOM VSX 7000
Duration 1 Month
Responsibility Analyzed & Designed the topology and full solution and implementation at the regional level and Managed the entire project
08 Project Centralization & Implementation of the financial System
Technology Involved Sage ACCPAC ERP 500, Peresoft Cash Book, MS SQL Server 2005
Duration 9 Months
Nature of the Project Centralized the financial system, upgrade the existing system to Sage ACCPAC ERP 500, Deployed the Peresoft Cashbook with On-Line Banking System
Responsibility Analyzed & Designed the total project, Managed the entire project implementation and post implementation processes, Conduct trainings throughout the Implementation & post implementation stages
09 Project Inventory Control System Implementation
Technology Profit Plus Inventory Control System, MS SQL Server 2005
Duration 3 Months
Responsibility Analyzed & Designed the total Implementation, Managed the entire Project, conduct trainings
10 Project Centralized Order Processing System
Technology MS .NET, Visual Studio 2008, MS SQL Server 2005, UML, MS Project
Nature of the Project Designed and Developed a fully functional order processing system for the entire region, total order handling via online, total order reporting, decision making supporting
Duration 6 Months
Responsibility Analyzed & Designed the total solution, Oversee the development process, guided the programmers, actively involved in programing, Managed the entire project
11 Project Barcode Systems Implementation
Technology MS .NET, Visual Studio 2008, MS SQL Server 2005, UML, MS Project
Nature of the Project Designed & Developed a fully functional Barcode System for Shipment Tracking
Duration 3 Months
Responsibility Analyzed & Designed the total solution, Oversee the development process, guided the programmers, actively involved in programing, Managed the entire project
12 Project Microsoft Licensing & Legalization and Software Licensing of the Entire Region
Technology Microsoft GGWA & Enterprise Agreement (EA), Symantec, Adobe etc.
Duration 3 Months
Responsibility Total coordination with Microsoft Sri Lanka and management of the entire project
In concluding as detailed above, based on my experience working with Mr(NAME), I can unreservedly recommend him for any intermediate or senior position specialized in the area of Business Systems Communications, ICT Network Security, Firewall and Internet Systems Security, ICT Business Project Management, and ICT Business Analysis & Design.
If you would like further elaboration, feel free to call me at below mentioned numbers.

Please let me know with this experience I can apply under the 261111 (ICT BA)?? I have 5 years 8 months on this position.

I do not have a B.sc but I have bunch of certifications and total of 11 + years of experience

IADCS from UK
MCITP
ACS Diploma
CEH (EC Council USA)
CCNA
Currently studying for the B.sc (Hons) Business Computing from University of WolverHampton – UK (Final Year)

 Foreign training in Singapore for Symantec/Microsoft products.
 Foreign training in Sydney Australia for MS Exchange 2010/ MS System Center Configuration Manager
 Foreign training in Malaysia for Fortinet/CISCO products

Please get back to me.
mbsup:

Last edited by peaceboy; Oct 14th 2010 at 1:01 pm.
peaceboy is offline  
Old Oct 14th 2010, 12:56 pm   #13
Forum Regular
 
shooterspalace's Avatar
 
Joined: Feb 2010
Posts: 90
shooterspalace is an unknown quantity at this point
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

Quote:
Originally Posted by srhjafry View Post
Thanks shooterpalace....we are now on the same page..... if i got something i will let u know ..and if you got something ..then do let me know...

Regards,
Srhjafry,

You can read this thread ->"MCSE which ANZSCO code ? 261111 or 261112". You will get some relevant idea.

Regards

shooterspalace
shooterspalace is offline  
Old Oct 15th 2010, 5:16 pm   #14
Forum Regular
 
Mongobear's Avatar
 
Joined: Jun 2009
Location: Offshore ;(
Posts: 53
Mongobear is an unknown quantity at this point
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

Quote:
Originally Posted by wookiee06 View Post
only duties related to be BA
Hi wookie,

what do you think of this? I've been assessed as 2231-79 (nec) back in December 2009 and I am now going for a reassessment as a BA. This is what I am doing and what my boss is also willing to sign and stamp. This is just a reference for the last 2 years, all in all I've been professionally working in the IT since 8 years.

Do you think the ACS will accept this and assess me as a BA ?

Quote:
Mr. Uli MyLastname, born on XXth of May 19XX in SOMEHWHERE, joined our company on 1st of April 2008. He is working in the “Corporate IT Competence Center EMEA” as a part of the “Windows System- & Messaging-Infrastructure” (WMI) team. Within his team Mr. MyLastname is primarily responsible for the Wintel- & Storage-sector.

His main-tasks among others include:

- working with other IT-levels, users and external providers to analyze business requirements
- identify, monitor and analyze IT-related business-processes, -procedures and work-practices
- formulate and write work-proposals, documentations and standard operational procedures; create system-specifications
- determine and investigate inefficiencies, recommend best practices
- prepare, organize and run training-events for users and IT-staff
- prepare project plans; calculate, resource and manage projects
- prepare, develop and implement test-plans; run acceptance- and usability tests; organize roll-out of functional solutions to the region
- provide guidance and support in the process of IT-system projects
- provide support to areal IT-departments in WMI-related issues
- carry out corporate IT-guidelines within the region
- evaluate system hardware, -software and methods
- act as a central contact point and information source

Mr. MyLastname especially focuses his duties on the region’s terminal services environment which provides crucial services to a user-base of approximately 5200 employees. He’s responsible for developing its design, configuration and modification.
Further duties include the development and design of the region’s groupware-system (Microsoft-Exchange), its Active-Directory System and its domain-policy structure.
then there's some words about what a great employee I am and details about my projects which are these:

Quote:
Among other achievements he successfully assisted and managed many important projects during his employment. To name a few:

• evaluation and design of a standard configuration for all Terminal-Servers within our responsibility
• migration from Citrix Metaframe 4.0 to Metaframe 4.5 and XenApp 5
• preparation and execution of a 64-bit Terminal Services pilot-project on Windows 2008
• implementation of a global printing solution (in process)
__________________
ACS 2231-79 (no specialisation) approved 22nd Dec 09, , IELTS 9/8/7/7 30th Apr 10, 175 lodged 5th May 10 ... now stuck in cat4
Mongobear is offline  
Old Apr 4th 2011, 10:23 am   #15
Just Joined
 
Joined: Nov 2010
Posts: 6
securenet is an unknown quantity at this point
Default Re: Query about ICT Business Analyst (ANZSCO Code- 261111)

As there is no update for sometime for this thread, I am checking here to know if any of the ASCO 2231-79 guys tried applying for ANZSO ICT Business Analyst and successful?

Appreciate your comments.
securenet is offline  
Closed Thread

Go Back   British Expats / Living & Moving Abroad / Australia / Immigration, Visas & Citizenship (Australia)

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


 

All times are GMT. The time now is 8:22 am.


Powered by vBulletin: ©2000 - 2014, Jelsoft Enterprises Ltd.
© 1999-2010 BritishExpats.com